QR codes instead of barcodes: what really changes in 2027

In 1992 Masahiro Hara, an engineer at Denso, a company that made parts for Toyota, was dealing with a very down-to-earth problem: a single component could need as many as ten barcodes, and workers spent all day scanning them. He found the inspiration for a solution while playing Go in the factory canteen. The result was the QR code, which can be read from any angle, and Denso published the specification royalty-free (The Hustle).
Thirty-four years later the same code is arriving at shop checkouts. International headlines already say barcodes are going extinct. They are not entirely wrong, but they are getting ahead of themselves. A QR code instead of a barcode means more than swapping a label on the packaging. It changes the answer to the question of what packaging is for, and for most Slovenian manufacturers that question will be harder than the printing itself.
In short: there is no legal obligation, the EAN barcode stays on packaging after 2027, and retailers will gradually start reading QR codes as well. The first step is simple: pick the products that are due for a reprint in the coming year and decide who will look after the content the code leads to.
What Sunrise 2027 is and what it does not mean
Sunrise 2027 (also called Ambition 2027) is an initiative of GS1, the organisation that assigns product numbers for barcodes worldwide. The number is called a GTIN (Global Trade Item Number): it is the number under the bars on every product in a shop. The aim of the initiative is for retail checkouts to read 2D codes, meaning QR codes and GS1 DataMatrix, alongside traditional barcodes by the end of 2027 (GS1: Ambition 2027).
2027 is not an EU legal deadline, and it is not a date by which the barcode has to come off the packaging. It is an industry target for checkout readiness. GS1 Slovenia is unambiguous on this: existing barcodes will not disappear overnight, the two systems will coexist for some time, and during the transition packaging will carry both codes (GS1 Slovenia).
“This is a gradual transformation!”
GS1 Slovenia, Practical aspects of the transition to 2D codes (Source: https://www.gs1si.org/novice/novica/prakticni-vidiki-prehoda-na-2d-kode)
For packaging designers, moving to a QR code instead of a barcode means, in practice, one more constraint on space: until retail catches up, GS1 requires both codes on the product, no more than 50 mm apart (The Hustle).
2027 is not the deadline for being done with the barcode. It is the deadline for knowing where your QR code leads.
Why a QR code instead of a barcode
Why a QR code instead of a barcode at all? A traditional EAN barcode tells the checkout only which product this is and what it costs. It does not say which batch it belongs to, when it expires or where it comes from. That became a serious problem during the wave of food recalls at the start of this decade, after which the US FDA tightened its traceability requirements for the food chain in 2022 (The Hustle).
A 2D code fits a good deal more into the same small square: a serial number, expiry date, batch code and a link to online content. GS1 Slovenia says this enables better traceability, better stock management and less waste (GS1 Slovenia).
Around 200 times more data can be stored in a QR code than in a traditional barcode.
Source: The Hustle (https://thehustle.co/originals/why-barcodes-are-about-to-go-extinct)
For shoppers the change is more subtle than marketing slides suggest. Business strategist Kate Hardcastle, who works with GS1 on its research, finds that shoppers do not want more information. They want the right information at the moment they need it: allergens, origin, instructions or a recipe for a quick dinner.
79% of consumers in a survey carried out with GS1 said they were in favour of QR codes.
Source: The Hustle, research by Kate Hardcastle and GS1 (https://thehustle.co/originals/why-barcodes-are-about-to-go-extinct)
Almost half of the retailers surveyed are already rolling out support for QR codes.
Source: The Hustle, research by Kate Hardcastle and GS1 (https://thehustle.co/originals/why-barcodes-are-about-to-go-extinct)
The square is the easy part. The hard part is where it leads.
“Printing a new square on a box is the easy part.”
Kate Hardcastle, business strategist and author of The Science of Shopping (Source: https://thehustle.co/originals/why-barcodes-are-about-to-go-extinct)
When a company introduces a QR code instead of a barcode, it prints a link on its packaging. And a link needs infrastructure: a landing page, up-to-date data and someone responsible for making sure it all still works two years from now. This is where most companies make the same mistake: they treat the QR code as a graphic element, not as part of the customer's digital experience.
Picture a spread manufacturer that two years ago printed a static QR code on its jars, pointing to a page of recipes. This year they redesign the website and the address changes. The old page returns a 404 error, while a few hundred thousand jars are still sitting on shop shelves and in kitchen cupboards. Every scan is now a small advert for carelessness, and the company only finds out when a customer complains on Facebook.
Packaging on the shelf outlives your website. A QR code that ignores this is a time bomb with a logo on it.
Large companies have the systems and budgets for a transition like this. Last year Unilever updated the packaging for products from brands such as Dove, Vaseline and Hellmann's.
45,000 products (SKUs) were covered by Unilever's packaging update.
Source: The Hustle (https://thehustle.co/originals/why-barcodes-are-about-to-go-extinct)
The companies with the most work ahead are those that have used the same box for decades. For a mid-sized Slovenian manufacturer this is not a project for the packaging designer alone. It involves the designer, IT, marketing and the head of quality, all at once.
Static or dynamic QR code on packaging
A static QR code has the web address written directly into the pattern. Once it is printed, the destination cannot be changed. A dynamic QR code goes through a redirect, so you can change the destination even after printing, while the code on the packaging stays the same (the difference between static and dynamic QR codes).
For packaging and for Sunrise 2027 preparation, there is one more term to keep separate. GS1 Digital Link is the standard that defines how a GTIN is written into a web address so that a checkout can read it (GS1 Slovenia: GS1 Digital Link). A dynamic code is therefore not automatically a GS1 code. If you want a QR code instead of a barcode to work at the checkout too, the data in the code has to follow GS1 rules. An ordinary short link is no substitute.
Where the dynamic approach comes into its own is everything that happens after the scan. Someone has to manage the destinations shoppers land on, check them and measure them. For this part we at CNJ built 94.si, a Slovenian QR code generator and link shortener that we also run ourselves. It lets you change the destination after printing, alerts you when a landing page stops working, redirects by country or device (a Slovenian shopper to the Slovenian page, an Austrian one to the German page), runs time-limited campaigns and provides cookie-free analytics with data kept in the EU. We describe how to fit it into a GS1 Digital Link project in our guide to GS1 Digital Link for packaging.
Preparing for a QR code instead of a barcode in six months
Which products go to reprint first?
List your products by the dates their packaging is due for reprint. Those going to print in 2026 and 2027 are your pilot set. Do not redesign packaging because of the QR code. Add the QR code during a redesign that is already planned.
What do your retail partners require?
Ask them directly: which 2D codes they support, from when and with what print-quality requirements. The answers will differ from retailer to retailer. GS1 Slovenia offers advice and code quality checks for exactly these questions.
Who owns the data behind the code?
This is the question most often skipped. If nobody is responsible for the content behind the code, it will go out of date faster than the packaging. Appoint a person or team to look after landing pages, deadlines and updates. If you are going to encode a batch number or expiry date, the head of quality or traceability has to be involved too, because that data comes from production, not from marketing.
Where should the code lead?
Not to the home page. A shopper who scans a product wants information about that product: allergens, origin, instructions, a recipe. Design the content for a phone in a shop, held in one hand on a poor signal, not for a desktop screen.
How will you know it works?
Before a large print run, test the code on the actual packaging with a range of phones, and for GS1 codes also check print quality through the verification service GS1 Slovenia offers. After printing, track scans and set up an automatic alert for when the landing page stops responding. If you do not measure, you do not know whether the code was worth the space on the packaging.
Do not redesign packaging because of the QR code. Add the QR code during a redesign that is already in the plan.
Frequently asked questions
Q: Will barcodes disappear in 2027?
A: No. Sunrise 2027 is the target for retail checkouts to read 2D codes as well by the end of 2027. During the transition, packaging will carry both codes: the traditional EAN barcode and a 2D code.
Q: Why are retailers introducing QR codes instead of barcodes?
A: A traditional barcode contains only the product number. A QR code can also carry the batch, the expiry date and a link to information for the shopper, which improves traceability, recalls and stock management. The GS1 Sunrise 2027 initiative coordinates the transition globally.
Q: Do I have to remove the EAN code from my packaging?
A: No. Check with your retail partners, but both codes are used during the transition. The 2027 date does not in itself mean you can remove the EAN code.
Q: What is the difference between an ordinary QR code and a GS1 QR code?
A: An ordinary QR code can contain any web address. A QR code with GS1 Digital Link contains an address in which the product number (GTIN) is written according to GS1 rules, so a suitably equipped checkout can read it too.
Q: Can I change where a QR code leads after the packaging is printed?
A: Yes, if the code goes through a dynamic link, for example via 94.si. You change the web destination and the printed code stays the same. With a GS1 Digital Link code, the data in the code has to stay compliant with the standard.
Q: What happens if the page behind a QR code on packaging stops working?
A: With a static code, shoppers see an error and you cannot fix it without a reprint. With a dynamic code, you change the destination in your account, and with a tool that checks destinations regularly you find out about the error before a shopper notices it.
Conclusion
The barcode is not dying. It is getting a partner that will take over most of the work in the years ahead. The QR code instead of the barcode will arrive gradually, but companies that wait until 2027 for a retailer to demand it will have a data problem and very little time to solve it. Start with one product, one landing page and clear ownership.
If you want to try dynamic QR codes now, you can create a free account at 94.si and test your first code on your next flyer or packaging sample. And if you are wondering what the shopper should actually get after the scan and how that fits into your digital ecosystem, that is a topic for a Concept Review.
Point | Details |
Sunrise 2027 | 2027 is a target for checkout readiness, not a legal deadline for removing the barcode. |
Why a 2D code | A 2D code carries the batch, expiry date and a link, while a barcode carries only the product number. |
Infrastructure | Printing the code is the easy part; the hard part is the data and landing pages, which have to work for years. |
Static or dynamic | A dynamic code lets you change the destination after printing, but is not in itself a GS1 code. |
Preparation | Prepare for a QR code instead of a barcode with products already scheduled for reprint, and appoint a data owner. |
We write about it. We also build it.
Let's talk about your project
A 30-minute call to understand what you're building and how cvan we help. No brief required.
Prefer email?
info@cnj.si